-6-
SETTING THE ALARM MODE:
When you have set the alarm to the time required, select the alarm mode
required using the ALARM MODE button (see FIG.4).
• RADIO, will switch the radio on when it is time for the alarm to go off. First choose the
radio station and adjust it to the volume desired. (This is explained below).
• BUZZER, the clock radio alarm will make a sound typical of electric alarm clocks.
• DEMO will activate the sounds and effects installed in the product.
• OFF turns off the alarm.
Any of the alarm modes chosen will activate the light on the LCD screen or display.
SWITCHING THE ALARM OFF:
The alarm can be switched off in two modes at the chosen time:
1. Press the LIGHT/ SNOOZE button (see FIG.4) the alarm will go off again five minutes
later, and if you press the button again the alarm will go off again once more after a
further five minutes.
2. You can completely turn off the alarm by pressing the ALARM MODE
button for a few seconds, which will finally turn off the alarm. The word OFF will appear
on the screen in alarm mode (see FIG.5).
Remember to switch the alarm on again to use the alarm clock function again the
following day.
Using The Radio:
Press the RADIO button (see FIG.4) to activate the RADIO mode manually.
Choose the frequency desired with the TUNE buttons, forward or back until you
find the station desired in the FM frequency and adjust the sound level with the
VOLUME button.
The radio station on the screen will come on when the alarm is activated in
RADIO mode.