-6-
RADIO:
Place the function selector (17) in the desired position, AM or FM. Use the tuner (14)
and choose a station following the station visor (15). Use the telescopic antenna (3) to
improve reception. Adjust the volume control (16) and the sound will come through
the loudspeakers (7).
PLAYING A CD:
Move the function selector (17) to the “CD” position. To put in a CD, press the open
button on the front of the mask (5). Remove the protective cardboard from the reader,
if there is any, and keep it for future use to transport the unit. Insert the CD firmly in the
central position.
To close the cover, gently move it back to its initial position. The LCD display will show
you the number of songs on the CD.
Press the PLAY/PAUSE (8) button once you have inserted the music CD. Adjust the
volume level as required (16) with the control on the front of the mask. To go forward
or back in songs, press the SKIP >> (11) or SKIP << (9) buttons, respectively. Use the
same buttons to go forward or back when playing a song by pressing and holding them.
Press the PLAY/PAUSE button (8) to pause the song being played. Press it again to
resume playing. Press the STOP (13) button to stop the CD player.
Repeat function:
during play, press the REPEAT button (6) once and the current song
will play again when it finishes. Press REPEAT again, and the entire CD will play again
when all the tracks on the CD have finished. Press again to deactivate this function.
Program:
This function is used to choose songs on a certain CD and play them in the
selected order. To do so, insert the CD in the player and press the PROGRAM (12)
button. The LCD DISPLAY (10) will show a flashing number 01, which is the first
position to memorise. Use the “<<” and “>>” buttons to choose the song, press
PROGRAM again to memorise and the DISPLAY will show you the next memory
position to select. Follow the same procedure to choose the order for playing the songs.
You can memorise a maximum of 20 positions. Once you have finished the selection,
press PLAY/PAUSE (8) to play the selection you have programmed.
To erase the selections, press the STOP button (13) twice and move the FUNCTION
SELECTOR (17) to the RADIO position, putting the switch in the OFF position.
Using your CD Boombox:
