Jaz audio TEJZEARUPBEATTWSK, User Manual

Page: 4 / 24

4
Charge the batteries:
To recharge the earphones insert them in the charging box. It
will switch on, the first of the four blue LEDs will flash to indicate
charging. One lighting LED means 25% charged, 4 LEDs on means
100% charged. The earphones indicate low battery with a sound
when they are at less than 10% charge.
Switching on and Pairing to the smartphone:
Take the earphones out of the charging box to activate and pair
them. You will hear the following messages in sequence “POWER
ON” (switched on), “PAIRING” (pairing is underway). At this point it
is possible to search in the smartphone’s Bluetooth® list for “JAZ
UPBEAT” and select it. After the first pairing, successive pairings
will happen automatically and will be confirmed by the message
“CONNECTED”.
To switch off the earphones just put them back inside the charging
box
Main functions:
UK
INSTRUCTION MANUAL
Switching on
Switching off
Answering calls
Ending calls
Rejecting calls
Call the last number
Play/pause
Previous track
Next track
Voice assistant
Remove from the box or press
the button for about 5 seconds
One click on the button of the right
or left earphone
Place in the box or press button
for about 5 seconds
Double click the right or left earphone
One click on the button of the right
or left earphone
One click on the button of the right
or left earphone
Press the right button for 4 seconds
Double click the left earphone
Double click the right earphone
Press the button of the right or left
earphone for about 5 seconds