ENGLISH - 7
6 - ENGLISH
Microphone
POWER
ON/OFF
VOICE CALLS
PAIRING /
CONNECTION
Press and hold power button for 2 seconds to power ON your
s-Go One speaker. You will hear a welcome tone once powered
ON. Your speaker will automatically try to connect to the last
device used (if any). Press again for 2 seconds and your speaker
will power OFF.
JAYS s-Go One has built-in mic. for handsfree operation during
calls. Calls can be accepted from your device, or s-Go One by
pressing the Power button once.
If you want to pair a new device with your s-Go One then your
speaker must be put into pairing mode first.
When your speaker is powered ON it will automatically be in
both Pairing, and Connection mode for 5 mins. In this period,
you are able to pair any new devices or re-connect already
paired devices. If your speaker is already powered ON you can
double press the power button for enabling Pairing Mode again.
When your speaker enter pairing mode you will also hear the
message “Waiting for connection” and your speaker will now be
visible on your Bluetooth device list. When successfully paired/
connected, speaker will reply “Time to play”.
Power button with LED indication
(
Will be RED during charging
)
Micro USB
for charging only
CONTROLLING YOUR
NEW JAYS S-GO ONE
HOW TO USE YOUR
NEW JAYS S-GO ONE
