Electronics.
m-Six Wireless
The electronics are made to be as small as
possible to fit everything in Right earphone
side so we can use the Left earphone side
to fill with as big battery as possible. As the
Right side also is the BT antenna side,
PCB-layout is designed to optimize the RF
performance. The circuit board and anten-
na are placed to maximize the distance
between these for avoiding interference.
Charging - Charging is made by custom
pogo pin charging system as micro-USB
would be too big to fit inside. A custom
magnet on the Right side housing connects
to a magnet on the Charging cable.
