PVB Series Collegiate Net System Instructions
1
Safety
•
WARNING
:
Do not attempt to remove the height adjuster pin if the net is under
tension.
•
WARNING: Always use protective padding around each upright during use.
•
WARNING: Uprights are heavy. Do not attempt to lift or install without assistance.
•
IMPORTANT: Follow all warning labels on equipment.
•
IMPORTANT: Inspect for damage before and after each use.
2
Specifications
U
PRIGHT
O
UTER
D
IAMETER
H
EIGHT
R
ANGE
#
OF
P
OSITIONS
W
EIGHT
U
PPER
U
PRIGHT
M
ATERIAL
L
OWER
U
PRIGHT
M
ATERIAL
PVB-1500
3-1/2”
(89mm)
6’6” to 8’2”
(2.0m to 2.5m)
16
Pin Stops
152 lbs
(69kg)
Aluminum
6063
Steel
PVB-4500
(3” FLOOR
SLEEVE)
3-1/2”
(89mm)
6’6” to 8’2”
(2.0m to 2.5m)
16
Pin Stops
104 lbs
(47kg)
Aluminum
6063
Aluminum
6063
PVB-5000
3-1/2”
(89mm
6’6” to 8’2”
(2.0m to 2.5m)
16
Pin Stops
104 lbs
(47kg)
Aluminum
6063
Aluminum
6063
3
Introduction
Note: The Flex Net supplied with this system will stretch slightly during the first few uses.
This is a natural consequence of the headband fibers being stretched under tension.
During this break-in period, the headband and net body may sag during use. Simply
increase tension to remove the sag.
These instructions assume that the appropriate ground sleeves have been correctly
installed:
1
NCAA and NFHS rules require that the upright standards must be installed at least 3’3”
(1m) outside the court boundaries. Jaypro recommends 36’ spacing on center to satisfy
both regulations.
