Rev:A, 3/12
Page 5 of 7
12)
Lower the other hoisting ropes and attach the spring clips to the cable.
13)
Evenly raise the net to its maximum height. You may need to adjust where the
intermediate hoisting ropes are attached, from one side of a zip tie to the other.
14)
Adjust the position of the net so it is centered. Now lower the net to about 4 ft above the
ground and attach a D-ring (#18) at each intermediate attachment point, as shown in
figure 6. This will make future installation of the net a snap. Attach the spring clip onto
the D-ring.
15)
Fully raise the net and cleat-off the hoisting rope. Tie off the corners of the net by
attaching a chord from the corner to the cable thimble.