Page
4
of
5
WHENEVER THE GROUND INSERT (6) IS NOT IN USE, IT SHOULD REMAIN COVERED WITH THE MARKER FLAG BOTH
TO ENSURE THAT THE INSERT ISN'T FILLED WITH SAND AS WELL AS TO INDICATE THE LOCATION OF THE INSERT.
PROCEDURE
1.
INSERT CORD GRIP (3) INTO TOP CAP (1).
2.
INSTALL WASHERS (5) AND NUT (4).
3.
INSERT STAKE FLAG (2) INTO CORD GRIP (3) SUCH THAT THERE IS SOME OF THE RUBBER SLEEVE IS
EXPOSED.
4.
TIGHTEN NUT ON CORD GRIP UNTIL THE FLAG NO LONGER SLIDES IN GRIP.
SLIDE CAP OVER GROUND INSERT AND BURY WITH SAND.
