Rev-B
Page
6
of
12
BEFORE YOU START
A.
Identify and inventory all parts using the checklist boxes that appear on each
page. Be sure to keep the hardware bags and their contents separate. If any
parts are missing call Our Customer Service Department (800-243-0533).
1. 2 Adjustable Wrenches
10. Concrete-1/2 yard or 14-16
2. Socket Set
Bags, (80 lb. bags)
3. 9/16" Wrench
11. Phillips Head Screwdriver
4. 3/4" Wrench
12. Electric Drill
5. 15/16" Wrench
13. Carpenter's Level
6. 1/2" Wrench
14. A minimum of 2 Ladders
7. Hammer or Mallet
15. Water Supply
8. Tape Measure
16. Degreaser
9. Shovel
17. 1/4” Drill Bit
SUGGESTED TOOLS AND MATERIALS FOR ASSEMBLY
(Not Included)
FAILURE TO FOLLOW THESE SAFETY INSTRUCTIONS MAY RESULT IN SERIOUS INJURY
OR PROPERTY DAMAGE AND WILL VOID THE WARRANTY.
●
Proper and complete assembly, use and supervision is essential for proper operation and
to reduce the risk of accident or injury. A high probability of serious injury exists if this
system is not installed, maintained, or operated properly.
●
The major components of this system have considerable weight. It is recommended that
scaffolding or a lift jack be used to hoist the outrigger, frames and board into place.
●
If using a ladder during assembly, use extreme caution. Follow all warnings and cautions
on the ladder carefully.
●
Before digging, contact the appropriate agency to locate underground power cables, gas,
and water lines. Do not install the system within 20 feet of overhead power lines.
●
Climate, corrosion, or misuse could result in system failure.
●
If technical assistance is required, contact the manufacturer.
●
Most injuries are caused by misuse and /or failure to follow instructions.
●
Use caution when using the system.
!
!
SAFETY INSTRUCTIONS
Summary of Contents for LS-200
Page 9: ...Rev B Page 9 of 12...
Page 11: ...Rev B Page 11 of 12...
Page 12: ...Rev B Page 12 of 12...
