PVB Series Collegiate Net System Instructions
- 8 of 8-
UPDATED 12/12/2018
8.
Tension the net by turning the winch handle clockwise
2
.Adjust anchor strap as
necessary to keep net centered.
9.
Verify net heights and net centering. The uprights will deflect inward and
downward due to net tension; you may need to adjust their heights and/or re-
center the net.
WARNING: Release tension from the net before removing height
adjust pin
.
10.
Attach the bottom net straps to each upright as shown in Figure 6-4. Wrap Velcro
straps around buckles for additional player safety.
Figure 6-4: Secure bottom net straps to uprights.
11.
Attach net antennae and tapes according to instructions included with
antennae set.
12.
Install pads around each upright.
7
Maintenance
Your LadyPro Carbon Volleyball System is designed to provide years of play; however, it is
recommended that the components be inspected at least once every season, for signs
of excessive wear. Key areas to inspect include (but are not limited to):
▪
Strap webbing
▪
Net
▪
Winch mechanism
▪
Screws and nuts
If you require additional information or support maintaining your volleyball system, please
contact the Jaypro Sports customer support team, Monday through Friday, 8:30AM to
5:00 PM (EST), at 1-800-243-0533.
2
NCAA and NFHS rules stipulate that there be no more than ¾” of sag in the net
headband when fully tensioned.
