Jaykal JLS68103-G60-ACTR Installation Instructions Download

Page: 4 / 4

LED Driver Replacement Guide for Post Top Acorn Light

Step 11. Utilizing two wire caps reconnect the DC driver output wires (Red to Red) and (White to Black) (Figure 12.)

Figure 12.

Step 12. Reinstall the driver mounting plate in its
original position and reinstall the four screws re-
moved in step 2. (Figure 13.)

Step 13. Return the top of the fixture to its original position and reinstall the

four screws removed in step one (Figure 14.)

Figure 13.

Figure 14.

Summary of Contents for JLS68103-G60-ACTR

Page 1: ...screws shown in Figure 1 Step 2 Remove the top of the fixture and locate the four screws in Figure 2 Step 3 Remove the driver mounting plate and the LED assembly from the fixture Figure 3 Step 4 Cut the red and white wires connecting the driver to the LED assembly Figure 4 Figure 1 Figure 2 Figure 3 Figure 4 ...

Page 2: ... green wires Figure 5 Step 6 Remove the two screws retaining the driver to the mounting plate and remove driver Figure 6 Step 7 Install new driver and reinstall mounting screws Figure 7 Step 8 Strip the DC power connection wires red and white wires back approximately 1 2 inch Figure 8 Figure 5 Figure 6 Figure 7 Figure 8 ...

Page 3: ... Step 9 Utilizing two wire caps reconnect the AC input wires Black to black and white to white Figures 9 and 10 Step 10 Pass the red and white wires from the LED assembly through the hole in the driver mounting plate Figure 11 Figure 9 Figure 10 Figure 11 ...

Page 4: ...s Red to Red and White to Black Figure 12 Figure 12 Step 12 Reinstall the driver mounting plate in its original position and reinstall the four screws re moved in step 2 Figure 13 Step 13 Return the top of the fixture to its original position and reinstall the four screws removed in step one Figure 14 Figure 13 Figure 14 ...