Jayco REDHAWK 2023, Owner'S Manual

Page: 78 / 141

72
Section 7: Fuel & Propane System
Servicing or Filling
Because the container is not removable, the motor home will need to be driven to a qualified
propane facility for servicing or filling.
Only the authorized gas service technician(s) should be near the motor home while the pro-
pane tank is being filled. The new propane container must be carefully purged for proper ap
-
pliance performance and operation. The propane tank must
NEVER BE OVERFILLED.
Replace all protective covers and caps on the propane system and/or container after filling.
Make sure the valve is closed and the compartment door is securely latched.
LP Gas Container Overfill
Never allow your propane tank to be filled above the maximum safe level as indicated by
the fixed liquid level gauge.
Do not allow the visible gauge to be used for filling. Overfilling the propane container above
the liquid capacity indicated on the container, could allow liquid propane to enter the system
that is designed for vapor only creating a hazardous condition.
The following warming label has been placed by the propane container.
Refer to your Warranty Packet for more information on the LP gas system components.
Propane Regulator
™
NOTE: Regulator appearance and type may vary by model.
 Always shut OFF the engine while refueling
. Do not smoke and do not
operate other ignition sources while refueling.
 When the propane container is disconnected from the main supply
hose
and the P.O.L. connection, install the P.O.L. plastic cap that is at-
tached to the container.

If you suspect your propane container has been overfilled, contact
your dealer or a qualified propane technician for assistance imme-
diately
. Do not attempt to service a propane container overfill yourself.
Propane regulators must always be installed with the regulator vent facing
downward. Regulators that are not located in baggage compartments have
been equipped with a protective cover. Make sure the regulator vent faces
downward and (if applicable) the cover is in place to minimize vent blockage
that could result in excessive gas pressure causing fire or explosion.
Table of Contents Maintenance Record