Jayco JAY FEATHER Towables 2021, Owner'S Manual

Page: 143 / 177

141
Section 10: Appliances
Rail Mount (if so equipped)
 Hang the grill bracket on the aluminum mount-
ing strip located on the side of the recreation
vehicle.
 Open the (2) folding arms on the bracket mak-
ing sure they lock in position.
 Slide the grill onto the (2) arms against the
stops. Make sure the grill is fully on the arms.
Arms will slide into the “T” bracket on each
side of the grill.
 Insert the retaining pins into the arms.
 To remove the grill, remove the retaining pins
and simply slide it off the bracket arms. Wait
until grill has cooled down before removing it.
Refer to the grill manufacturer’s user guide for detailed
operating and safety information.
Gas BBQ Grill Prep (if so equipped)
Your recreation vehicle may be equipped with a propane “quick-coupler” connection and
support bracket for easy installation of the BBQ grill.
Attaching the “Quick Coupler” Connection
The “quick coupler” is directly connected to the RV propane system. The “quick-coupler”
connection is equipped with a positive shut-off valve.
Place the “quick coupler handle in the OFF position and push back the sleeve. The valve
handle must be OFF to make the connection.
1. Insert the plug and release the sleeve.
2. Push the plug until the sleeve snaps forward, locking the plug into the socket.
3. Turn the handle ON to allow propane to flow to the drop in stove.
Quick Connect Coupler
Gas Grill and Mounting
Bracket on Support Rail
NOTE: Grill weight is 26 lbs.
NOTE: This outdoor cooking warning label
should
not
be removed from the RV.
Table of Contents Maintenance Record