Jayco ESCAPADE 2004, Owner'S Manual

Page: 95 / 112

gasoline or gasoline additives (deicers) containing methanol because methanol can be corrosive to
fuel system components.
#
CAUTION: Do not use gasoline or gasoline additives containing methanol because
methanol can be corrosive to fuel system components. Avoid using highly leaded gasolines
and lead additives because of the extra engine maintenance that will be required.
“Genset” Control Panel
The genset control panel (Fig. 7-1) Is located behind
the access cover on the genset. It has the following
features:
START-STOP Switch (Fig. 7-1 - #1) - This is a rocker
switch which returns to its neutral position when you
let go. Hold it in the START position to crank and start
the genset and push it momentarily to the STOP
position to stop the genset.
Control Fuse - This fuse provides short circuit
protection for the control and remove control circuits.
Line Circuit Breaker - The line circuit breaker protects
the AC power leads connected to the genset from
overloads and equipment short circuits.
Remote Control
The vehicle has a remote control panel (Fig. 7-2)
inside the door for controlling the genset operation.
The a START-STOP switch has a lamp that lights to
indicate when the genset is running (which may not
otherwise be obvious, especially when the vehicle is
moving). The remote control also has an hour meter
and a battery condition meter. The hour meter records
genset operating time in hours. Use it for periodic
maintenance as a record of operating time. The
battery condition meter indicates whether voltage
across the 12-volt DC control system and battery is
normal. If the indicator consistently stays above or
below the normal zone, see Periodic Maintenance in
the manufacturer’s owner’s manual.
87 Type C Owner’s Manual
Fig. 7-1
Fig. 7-2