![background image](http://html1.mh-extra.com/html/jayco/eagle-eagle-super-lite/eagle-eagle-super-lite_owners-manual_3560112060.webp)
SECTION 8
PROPANE SYSTEM
56
I
NSTALLING
P
ROPANE
C
YLINDER
(
S
)
Located on the A-frame or front trunk
The containers must be positioned in the tray
with the valves pointing away from the trailer.
The wing nut is placed on the threaded rod to
hold the cross bar down and orient the
containers. The regulator bracket is held in
position by the threaded rod and centers the
regulator between the two cylinders that are
secured at the base on the tray.
Fig. 8.5 Double cylinder assembly
1. Connect the 3/8” low-pressure hose to the
outlet of the two-stage regulator.
2. Place the cylinders on the bracket
provided on the A-frame and secure them
so the outlet of the cylinder valves point
away from the front of the trailer.
3. Using the threaded center rod, position
the regulator bracket. This centers the
regulator between the two cylinders as
they are secured to the base tray.
4. Attach the1/4” inverted flare x 11” Type-1
pigtail hose to the regulator inlet and the
right hand swivel nut to the cylinder valve.
Located in a recessed compartment or
housing:
Fig. 8.6 Two propane cylinders
1. Connect the 3/8” low-pressure hose to the
outlet of the two-stage regulator.
2. Place the cylinder on the bracket in the
recess compartment or housing and
secure them so the outlets of the cylinder
valves are facing the “sidewalls” of the
compartment or housing (opposite of each
other).
3. Mount the regulator on the center back
wall of the compartment or housing so the
vent is pointed downward.
4. Attach the 1/4” inverted flare x 18” Type-1
pigtail hose to the regulator inlet and the
right hand swivel nut to the cylinder valve.
Main Supply Hose – Low Pressure
Attach the main supply hose from the
regulator to the brass manifold fitting in the
frame of the trailer. The swivel brass nut on
the main hose will be your final attachment.
Several things to remember each time the
propane container is removed:
Fig. 8.7 Main supply hose
1. Check that ALL fittings are tight.
The pigtail hose must be installed to avoid
tension or pulling stress at either end of
the hose. Keep the pigtail hose away from
sharp edges of the cylinder collar, rigid
corners, walls, doors or other compartment
structures including the cover.
Ensure that all fasteners are secured
before traveling.
Summary of Contents for Eagle Eagle Super Lite
