3
27. Cassette Door
28. Cassette Eject / Rewind Knob
29. Speaker RCA connector
30. Aux RCA Line-Out Output Socket
31. FM Antenna
32. Auto Stop (ON/OFF) Selector
33. AC Power Cord
Remove the stereo carefully from the box, retaining the packaging for future use.
AC POWER OPERATION
Connect the plug to a mains power inlet AC 240V -50Hz.
AM/FM TUNER
Operation
1. Set the Function Selector (24) to the Radio position.
2. Select the desired frequency band with the Band Selector (25).
3. Tune to the desired radio station by turning the Tuning control (26).
4. Adjust the volume (8) control to desired level.
5. To turn off the radio, set the Function Selector (24) to the Power OFF/ TAPE position.
Antenna
Wire and move it around to obtain the best reception.
For AM reception the signals are picked up through a built-in ferrite antenna.
Your may have to orient the unit to obtain the best reception.
FM Stereo and Mono Reception
When an FM signal is tuned in, stetting the Band selector (25) to FM ST. position will enable
the broadcasting to be received in stereo sound. The FM Stereo indicator will appear on dial pointer.
TURNTABLE OPERATION
Preparation
Open the Record Player Cover.
Release the Tone arm Clamp, and remove the stylus protector.
Listening to Records
1. Set the Function Selector (24) to the PHONO position.
2. Place a record on the turntable, over the central spindle. Place the EP adapter over the
central spindle when playing 17cm EP records.
3. Set the Speed Selector (4) to 33 or 45 or 78 rpm according to the record.
4. Release the tone clamp, and remove the protective cap from the stylus.
5. Lift the Tone arm with the Tone arm Lift Lever.
6. Move the tone arm to the beginning of the record, or to the start of a particular track.
7. Gently lower the tone arm onto the record with the Tone arm Lift lever to start playing.
8. When the record is finished the tone arm will automatically stop. Lift the tone arm from
the record and return it to the rest .
9. To stop manually, lift the tone arm from the record and return it to the rest.
10.
Auto stop ON / OFF selector on back panel
- Set the Function Selector (32) ,Switch to ON for
turntable auto stop function.
For EP 33 RPM – Switch to Auto stop “On” position - It enables the record auto stop when ending.
For EP 45 or 78 RPM – Switch to Auto stop “Off” position, It can play the whole song.
Notes: Do not stop or turn the platter manually.
Moving or jarring the turntable without securing the Tone arm clamp could result in damage
to the Tone arm.
Replace the protective cap on the stylus when not in use.