5
5.
Select the EDID (Extended display identification data) switch on the transmitter unit to 2D for
normal application regardless of the resolution and only switch it to 3D when the signal source is
using 3D formats.
6.
Select the EQ (Equalisation) switch on the receiver to:
a.
LOW when the Cat5E/Cat6 cable that used to link in between the
transmitter/sender and receiver is 0-20 meters long
b.
HIGH when the Cat5E/Cat6 cable that used to link in between the
transmitter/sender and receiver is 20-50 meters long
IMPORTANT:
- Cat6 cable is recommended for optimal performance of this unit. Cat5e can be used though
transmission distance will be limited.
- Never attempt to open, repair or modify any part of this unit or its accessories.
- Never get any part of the device or its accessories wet.
