While the AA2085 is off, press and hold
button for about 10 seconds,
and release it until red LED is on for 1 second and then blue LED is on for 1
second.
1.
LED indicator
LED indicator
Status of the receiver
Red and blue LEDs flash alternately
Pairing mode
Blue LED flashes once every 1 second
Standby mode and not
connected to a device
Blue LED flashes twice every 4 seconds
Connected to a device
Red LED flashes
Low power
Notes:
The pairing mode will stop after 2 minutes. The AA2085 will enter
standby mode if no devices are connected within 2 minutes.
The AA2085 can only pair with a Bluetooth stereo/speaker receiver
whose PIN number is “0000”, “1234”or “1111”, “8888”.
Every time the AA2085 is switched on during TX mode, it will
automatically connect to last connected device, i.e. Bluetooth
stereo/speaker receiver.
The AA2085 will automatically switch off if no devices can be connected
within 5 minutes.
