5
4.2 Main Function
MENU
function
A001
DMX address
soud Sound control mode
slou
Automatic slow mode
run0
fast
leon/ loff
colr
stEP
Pan /tilt adjustment
rest
rpan
Pan reverse
rtIt
Tilt reverse
Digital display always light/ Digital display cut after 1minute
Rest
5. How to control the fixture
There are three ways to control the fixture
A. Universal DMX controller
B. Master/Slave operation
A. Universal DMX controller
The fixture can be set the DMX address remotely by universal DMX controller. First, you
need to programming two scenes into a chase, and then link the fixtures to the universal
DMX controller. When you run the chase, all the fixtures of the chain will be set the series
DMX address automatically. The fixture uses four channels. Please refer to the following
diagram to set the address for the first four units.
B. Master/Slave operation
The fixture will allow you to link 16 fixtures together and operate without a controller. In
6
Master/Slave mode, the first fixture will control the others to give an automatic, sound
activated, synchronized light show. This function is good when you want an instant show.
The first fixture it’s DMX input cable will have nothing connect it, and the other fixtures will
be set in slave mode automatically. Their DMX input cables connect the last fixture DMX
output cable (daisy chain). Any fixture can act as a Master or as a Slave
6. DMX512 Configuration
5 DMX Channels Mode:
Channel
Value
Function
CH1
0-255
Pan
CH2
0-255
Tilt
CH3
0-255
pan/ tilt speed (CH1,CH2)
0-7
none
CH4
8-134
luminosity 0-100%
Manual selection of RGBW color
load
Initialisation
Automatic fast mode
135-239
strobe
240-255
0-223
color choice CH4<8
color+strobe CH4>8
224-235
color gradual
CH5
luminosity 0-100%
jump
236-255
