Jaycar Electronics N56 Series, User Manual, Page: 60 / 195

50
11
，
12
，
13
，
14
，
15
，
16
In the second line,
from the left to the
right:
NO1 C1
，
NO2 C2 ，
NO3 C3
，
NO4 C4,
NO5 C5 NC5
The first four are four groups of normal open activation output
(on/off button)
NO5 C5 NC5 is a group of NO/NC activation output (on/off button)
CTRL 12V Control power output. You need to close the device power to cancel
the alarm.
+12V It is external power input. Need the peripheral equipment to provide
+12V power (below 1A).
Earth cable.
485 A/B 485 communication port. They are used to control devices such as
PTZ. Please parallel connect 120T
Ω between A/B cables if there are
too many PTZ decoders.
3.8.1.5
2U Series
You can refer to the following sheet and
X288H288H288H
Figure 3-6
X
for alarm input and output information.
Figure 3-7
In the first line, from
the left to the right,:
1
，
2
，
3
，
4
，
5
，
6 ， 7 ， 8 ， 9 ， 10 ，
11 ， 12 ， 13 ， 14 ，
15
，
16
ALARM 1 to ALARM 16. The alarm becomes active in low voltage.
In the second line,
from the left to the
right:
NO1 C1
，
NO2 C2
，
NO3 C3
，
NO4 C4,
NO5 C5 NC5
The first four are four groups of normal open activation output
(on/off button)
NO5 C5 NC5 is a group of NO/NC activation output (on/off button)
CTRL 12V Control power output. You need to close the device power to cancel
the alarm.
+12V It is external power input. Need the peripheral equipment to provide
+12V power (below 1A).
Earth cable.
485 A/B 485 communication port. They are used to control devices such as
PTZ. Please parallel connect 120T
Ω between A/B cables if there are
too many PTZ decoders.
3.8.2 Alarm Input Port