background image

M

IC I

N

Manual

(7) Transmitter will standby if there isn't audio signal in 25 seconds.
When you switch on TV or input signal, the transmitter will start to
work. Receiver will  mute when it is not in receiving area, until it is
back to receiving area.

Note: when the transmitter is standby, its power indicator will still be
on, IR lamps will be off automatically, please turn off the transmitter
if you don't use it.

2. Normal hearing aid function instruction
(1) Connect the receiver with the microphone cable in MIC IN jack,
extend the cable, stick the microphone on the other end near the person
you are talking to. Switch on the receiver, you will hear other person's
sound. Adjust the volume, tone, and balance according to your
requirement, so as to get best effect.

(2) Put the microphone cable in your pocket, clip on the jacket, it can
be as normal hearing aid.

Manual

! "#

LINE IN

M

IC I

N

M

IC I

N

3. Wired hearing aid function instruction.
Plug the end of wired headphone cable in LINE IN jack of receiver,
connect the other end with audio sources like PC, Radio, MP3, etc, switch
on the

, you can hear sound from the audio source. Please adjust

the volume, TONE, Balance according to your requirement.

receiver

4. Use normal hearing aid function to listen to telephone instruction.
According to

2. Normal hearing aid function instruction”, put the

microphone near the speaker of a telephone, please be close to the
telephone while talking, you can hear the sound from the telephone.
According to volume, you can adjust the distance between microphone
and telephone's speaker, when the distance is shorter, the volume will be
louder, you can adjust the position of microphone to meet your
requirement.

5. Use normal hearing aid function to listen to mobile phone
According to

2. Normal hearing aid function instruction

, put the

microphone near the speaker of a mobile phone, don't be too close to your
mobile phone, otherwise there is some interference. While talking, please
face to the speaker of the mobile phone.

instruction.

4.telephone

5.

mobile phone

Note: Will only work on some phones that have a 3.5mm audio outputs.

Summary of Contents for AA2079









Reviews: