XE 360
I
NSTALLATION
USING A LADDER TO HANG THE GT 500 IS DANGEROUS.
USE PROPER LIFTING EQUIPMENT LIKE A SCISSOR LIFT.
DANGER
(A) Secure to Pipe
Hanger
Support Bar
(not provided)
Support Bar
(not provided)
1/4-20 U-bolt Package
Oscillator
1/4-20 U-bolt Package
(B) Universal Mount
Drill 5/16"
Clearance Hole
in Support
(C) With Oscillator
Anti-
seize
Required Use
Flat, Level
Surface
7
(1) 1/4-20 Hanger U-bolt Package
(1) 5/16-18 Universial Hanger Bolt Package
(1) 5/32" Allen Wrench
(1) 3/32" Allen Wrench
(6) Wire Tie
►
Level
►
7/16" Wrenches
►
1/2" Wrenches
U
NPACKING
C
HECKLIST
T
OOLS
R
EQUIRED
After unpacking the unit, inspect for any
damage that may have occured during
transit. Make sure to tighten fittings, bolts,
etc. before operation.
DO NOT OPERATE UNIT IF
DAMAGED DURING SHIPPING,
HANDLING OR USE. DAMAGE MAY RESULT IN BREAKAGE
AND CAUSE INJURY OR PROPERTY DAMAGE.
WARNING
Lock Washer
Finish Nut
Nylon Lock Nut
Hanger
Nylon Lock Nut
Finish Nut
Lock Washer
Flat Washer
5/16-18
Bolt Package
Hanger
(2) 1/4-20 Bolt
Nylon Lock Nut
Lock Washer
Finish Nut
Nylon Lock Nut
Securing To Pipe
- Use U-bolts provided. Tighten securely. The nylon locknut should be
tightened on top of the first nut to provide added protection.
Universal Mount
- The support should be secure, level and flat. Drill a 5/16" clearance
hole. It is IMPORTANT to tighten the second nylon locknut on top of the first nut to
provide added protection.
Note:
Anti-seize applied to bolt prevents galling.
Installation with Oscillator
-
Support bar should be level. Use the U-bolts Package
supplied with unit to secure Oscillator to bar. Use (2) 1/4-20 bolts with nylon lock nuts to
attach the GT unit to the oscillator's support plate.
NOTE: Tighten securely using two opposing wrenches to prevent stress on oscillator's
internal gears.
www.JigglyGreenhouse.com | (800) 878-7829 | [email protected]
