250
634
Rev. A
8
SYNCRA
Cushion
VI. REASSEMBLING THE JAY SYNCRA CUSHION
JAY®
VI. REASSEMBLING THE JAY SYNCRA CUSHION
Follow cleaning and maintenance instructions as described
in
"Easy maintenance and cleaning" then reassemble as
follows.
Place the JAY Fluid with Cryo Technology, ROHO DRY
FLOATATION Pad, or Visco foam insert on the inner
cover, making sure that all Velcro strip locations are
aligned. A misalignment or creation of an edge could cause
an unwanted pressure point that may lead to injury.
Insert the foam base/inner cover assembly into the outer
cover.
Ensure that the zipper is at the rear of the foam
base where the
pelvic loading area is located.
WARNING
