9
2.3 Use SD/MMC/SDHC Card
Insert the SD Memory card into the SD/MMC/SDHC Card Slot. Push it down until the card
stays latched. Do not force – check card’s position according to the position mark on the
camera.
Push and release inserted card if you wish to remove or replace the card.
Turn your power OFF before inserting / removing the SD Card.
Note:
The SD Card has a tiny LOCK switch on the side. Set the switch to un-LOCK position to
be able to store recorded videos and still pictures on inserted SD Memory Card.
2.4 Power On/Off
In power-off state, press the power key to power on the camera.
In power-on state, press the power key to power off the camera.
In power-on state, let the camera idle for 1 minute (default) to power off the camera
automatically.
In power-on state, when battery level is very low, the camera will turn off after several
seconds. You must recharge the batteries.
