JAXSUNNY HG61X0813 User Manual Download Page 4

Page: 4 / 4

STEP 4

Warning

STEP 3

PRODUCT ASSEMBLY

Please put the chair on a flat surface.

Please adjust the parts connecting the seat and the back to make sure four legs are on same

level.

Tighten the bolts.

Tip: It would be easy to adjust the legs by sitting on the chair and do that with the help of your

own weight.

Put the cover under the seat(G) to the cushion seat(B) .

1PC

Read the instruction carefully

Caution

See hardware and FURNITURE part list for guidance, be sure all parts are complete, before

you assemble, place all wooden parts on a clean and flat soft surface to prevent from being

scratched.

1.Do not fully tighten the bolt until all parts are assembled.

2.Do not over- tighten the bolt to avoid causing damages to the thread.

3.Cleaning of pu cover-wipe clean with a soft cloth moistened with

water and neutral detergent. Do not use bleach, chemical or biological cleaners.

4. Cleaning of fabric cover-wipe clean with a soft cloth without water. Do not use water bleach,

chemical or biological cleaners.

Summary of Contents for HG61X0813

Page 1: ...User Manual ...

Page 2: ...1 2 You need Hardware List 1PC 1PC 1PC A F B C E G 1PC D 1 1PC 1PC 1PC 13PCS 13PCS 13PCS 1PC 1 1 person is needed 2 Take 20 minutes 20mins 2 3 4 A B G D C F E M8 65mm ...

Page 3: ...he holes tighten every screw not too tight 50 is OK make sure every screw into the hole and then tighten all screws to 100 1PC 1PC A B 1 5PCS 5PCS 5PCS 1PC 2 3 4 1 3 2 4 A B 1PC F C E 1PC D 1PC 1PC 1 8PCS 8PCS 8PCS 1PC 2 3 4 Put the screws in the holes tighten the screws but not too tight 90 is ok D C E F M8 65mm M8 65mm ...