6/29/2015
https://help.jawbone.com/articles/en_US/PKB_Article/setupup2
https://help.jawbone.com/articles/en_US/PKB_Article/setupup2
3/7
3.
Use your finger to hold the loop in place and fold
the strap over. Note where the clasp lands.
4.
Remove the band and adjust the buckle by sliding
it in place.
5.
Put the band back on and insert the clasp into the
buckle.
*Band shown is an UP3.
Step 3: Check your band's mode to get started*
