6/29/2015
https://help.jawbone.com/articles/en_US/PKB_Article/setupup2
https://help.jawbone.com/articles/en_US/PKB_Article/setupup2
1/7
JAWBONE SUPPORT >
SETUP UP2
Setup UP2
Step 1: Charge your band*
1.
Your band takes approximately one hour to fully
charge. Connect the charging cable to your band by aligning the pins on the
charger with the band. A magnet will hold the charger in place.
2.
Insert the charging cable into the USB drive on
your computer or a standard USB wall adapter.
3.
Icons on the face of the band will light up and
pulse while the band is charging.