1.1 Plug & Play
Image that shows both possible cable connections (USB & 3.5mm)
Play audio from any device through USB or 3.5mm stereo mini-jack. The volume
is loudest when plugged in via USB.
1.2 Connect Wirelessly
Image that shows the range of products that JBE can pair with (phone, tablet,
laptop)
Your Jawbone can wirelessly stream audio from any A2DP-enabled Bluetooth
device within 150 feet. Just follow these steps:
1.2a Prepare Your Jawbone
Diagram for pairing action (similar to ICON)
1. Hold the ON/OFF SWITCH in the upmost position
2. Wait for the LED RING to flash red & white
3. You will hear “Jawbone is ready, waiting to connect”
4. Release the ON/OFF SWITCH to the middle/on position
12.b Prepare Your Phone or Device
Turn on Bluetooth®.
On a iPhone, iPod or iPad: Go to SETTINGS > GENERAL > and enable
BLUETOOTH
On a Blackberry®: Go to SETTINGS/OPTIONS > BLUETOOTH and enable
BLUETOOTH
Other Cell Phones: Go to Jawbone.com/Pairing or review the instruction manual
that came with your phone.
1.2c Make the Connection
Go to your phone or device’s Bluetooth® settings.
Add or search for devices: When “Jawbone JBE” appears, select it.
If asked for a passcode: Enter “0000”
This is a one-time event per device. To pair your Jawbone JBE to another device,
repeat steps 1.2a to 1.2c.
2 GET LISTENING
(worthy of it’s own section? I’m slim on content here)
2.1 Adjust the volume
Same copy as ICON, but flip to this “…while listening to music or on a call,…”
3 GET TALKING
Same as ICON instructions, but delete 3.4 and 3.5
4
GET APPS & MORE
