Jawbone JBE User Guide :: 8.3.2010
Image needs highlighted in yellow
CONTENTS
JBE Anatomy
Power Up
1. Get Connected
2. Get Listening (I’m slim on content for this proposed section)
3. Get Talking
4. Get Apps & More
Troubleshooting
Specifications
Safety Information
JBE ANATOMY
Image of JBE (2 are probably required: top & side perspectives)
•
Micro USB (for charging/power)
•
On/Off
&
Pairing
Switch
•
Audio Input (3.5mm stereo mini-jack)
•
LED Ring (is it a ring?)
•
Volume
Buttons
•
TALK
Button
•
Built-in
Microphone
If the LED Ring is…
Flashing White: Jawbone is trying to connect to your phone or Bluetooth® device.
Flashing Red: Battery is low. Power up!
Flashing Red + White: Jawbone is in pairing mode and ready to connect to your
phone or Bluetooth® device. Go to your phone’s Bluetooth settings to connect.
POWER UP
Your Jawbone JBE is partially charged and ready to use right out of the box.
Image that shows device being plugged in and powered via USB
For a Full Charge: Plug it into your wall charger or a USB port on your computer.
To Hear Remaining Battery Life: Press the TALK BUTTON when not on a call.
When Battery Is Low: The LED RING flashes RED.
When Fully Charge: The LED RING turns WHITE.
Note: A full charge takes 3 hours and results in up to 5 hours of listening time.
1. GET CONNECTED
