JAVES LCD PROJECTOR
34
5. After replacing new lamp, push fully and squarely into socket, twean down and fix up the two
screws on the top cover.
6. Replace the cover and tighten the screw on back panel to fix up.
7. Emplace the projector softly and make the top cover upturned.
Maintenance and replacement of air filtter
Maintenance of air filtter
Please clean the air flitter termly, the interval time is about 100 hours.
1. Turn projector off and unplug the power cord.
2. Use vacuum cleaner to clean the air flitter from the mulch cover of it.
Cleaning the air filtter
In the condition that dirt in air flitter affects normal Aeration, please clean the air fliter as follows:
1. Turn projector off and unplug the power cord.
2. Remove the air flitter from the rabbet.
3. Put off the flitter, clean it by water. After it dried, replace it.
Items must obey
Before maintenance, make sure to turn projector off and unplug the power cord.Please read “ no-
tices” of this manual, and maintain in correct way.
In the condition that the flitter is removed, please do not use this projector.
When the air flitter become clogged with dust, the temperature inside will increase, and may
cause wrong work. When this condition occurs, the projector will cut off the power to avoid the
temperature increasing too much.
