1
JAVES LCD PROJECTOR
BEFORE USE
Please read this manual carefully before operating the projector and keep
it properly.
Warning
Do not attempt to repair or adjust this equipment except professional worker, and keep the seal
intact, otherwise the service promise invalidation.
Do not use the projector in damp, high temperature, shaking, continually moving places. Oper-
ating temperature is between 5¡ãC to 35¡ãC, and only use it on a level and stable surface,
avoid falling down and hitting acutely.
Only use the projector in dark environment to make sure the imaging effect. The projection
screen should avoid direct irradiation of strong lights.
Do not look directly onto the lens when the projector is in use. Eye damage may occur!
Do not look at laser beam on remote device directly as it may cause eye damage, and do not
make others look it directly.
Keep the fans running before turn off the power to cool the projector.
Do not turn on and off the projector continually, the interval should be longer than 5 minutes.
When instead the bulb, please follow the direction of this manual and cool the projector without
fail.
Do not clog the opening (absorption tube/exhaust pipe) of the projector when use the projector,
otherwise it makes internal temperature increase and impact using term.
Please comply the following items to protract the using term.
Correct using methods
Turn off the power before cleaning the projector
Please use soft cleanser and cloth to clean the shell
Please draw the power line from the electrical outlet, if do not use the projector for a long
Wrong using methods
Clog the exhaust vent.
Use abrasive or cere to clean the projector.
Put the projector in the following places:
place where the temperature too high or low, damp place
place easy to bring dust
place have strong electromagnetic flied
z
z
z
z
z
z
z
z
z
z
