manualshive.com logo in svg

Javelin WCRAL Series, Manual, Page: 3 / 4

Share
Download
Javelin WCRAL Series Manual Download Page 3

M10 flat head socket mounting bolts  

• 4 - M10 flathead socket mounting bolts are supplied to fit 

the mounting bracket.  

• You will need a 17mm wrench and 6mm hex key wrench. 
• Insure welding cable lug is shrink wrapped to insulate the 

lug stem from the reel (Refer to WCRAL Safety) 

Installation 

 

Summary of Contents for WCRAL Series

Page 1: ...Welding Cable Reels stacked vertically with reinforced mounting bracket Remote Power Cord Hanger Included Model WCRAL1 Single Insulated Welding Cable Reel with reinforced Mounting bracket Each reel holds approximately 180 ft of 2 0 cable Model WCRAL LR Set of two Insulated Welding Cable Reels with reinforced mounting bracket Same mounting bracket as WCRAL1 bolt a WCRALS opposite to WCRAL1 to creat...

Page 2: ...is not cracked Shrink wrap or apply electrical tape to all but the contact end of the connection cable lug Be sure cable lug contact points and WCRAL contact points are clean and free of corrosion When operating in winter conditions where road salt is used be aware the salt can corrode electrical contacts Clean contacts as needed Caution Insure welding cable lug is shrink wrapped to insulate stem ...

Page 3: ...0 flathead socket mounting bolts are supplied to fit the mounting bracket You will need a 17mm wrench and 6mm hex key wrench Insure welding cable lug is shrink wrapped to insulate the lug stem from the reel Refer to WCRAL Safety Installation ...

Page 4: ...osive action of the salt Replacement parts are available for WCRAL reels Please refer to part list SET SCREWS AND SWIVELING CONTACTS LUBRICATE THE SWIVELING CONTACTS Occasionally at least once every 12 months put a small dab of grease on the brass swiveling contacts Access the swiveling contacts by loosening the 3 locking setscrews and screwing apart the two halves of the reel ...

Reviews:

No comments