Installation
Caution: Over tightening nuts may result in damaged insulators.
•
4 - M10 flathead socket mounting bolts are supplied. You will need a
17mm wrench and 6mm hex key wrench.
•
Mount WCR-2 and WCR1 with reel to the right of mounting post. Mount
WCRLR as marked on reels. This will insure locking nut will tighten when
turned rotating lock knob towards you.
Locking knob
•
Insure all connections are insulated from the
reel by heat shrink insulation.
lock
free
•
Mount welding cable connection lugs between
brass nuts and use the steel nut as locking nut.
