6. Applying weight
Position the tool on top of the card stack to serve as a weight
to assist the feeding of the last 30 (approx.) cards.
7. Loading cards during printing
To load cards during printing, feed a stack of about
50 cards through top of stacker.
Reposition tool (weight) onto top of cards.
To load a larger batch of cards, repeat section 5.
IMPORTANT:
IF ANY
CARDS REMAIN IN THE STACKER,
SLIDER MUST BE PUSHED IN
BEFORE
ROTATING SUPPORT-ARM.
5. Loading cards
A.
Push slider into printer.
While holding stacker, rotate
support-arm away from printer
and carefully drop stacker down.
C. Push cards into position and
close lid.
Slide lid catch to lock lid.
Lift stacker into its upright
position and rotate support-arm
to secure.
B. Slide open lid catch and open lid.
Load cards into stacker, ensuring
they lean forward, towards printer.
D. Pull slider out to its
FULLY EXTENDED position.
slider
support-arm
lid catch
