Installing the print driver software and setting driver options
Printing with the J110i printer requires the Windows printer driver and your card design/
issuing software or printer command level programming through the printer interface.
The J110i card printer can be used with any Windows 2000 or Windows XP computer,
using the drivers provided on CD with the printer.
This section contains information on the printing of a sample card in colour (using the 5-
panel colour ribbon YMCKO and the Windows printer driver).
Note:
If updating the printer driver from a previous version, before installing the updated
printer driver version, always delete the existing version from your computer.
Installing the J110i print driver
To install the J110i printer driver automatically on all operating systems, use the Javelin
Install Wizard.
Note:
Ensure that you have administrative privileges to perform this installation, or contact
your IT department.
The Install Wizard will walk you through the appropriate installation steps. The Wizard will:
Automatically launch when the driver CD is inserted.
From the main menu of your documentation CD, select your desired language and
then select "DRIVERS" from the subsequent menu. The Install Wizard will walk you
through the appropriate steps.
Delete previous versions of the driver and clean up any necessary registry entries. You
must select "Remove" from the install options to remove any previous driver versions.
11
