1. Battery Charging
Plug the power adapter into a wall outlet (110
– 240V) and plug cable 14-578125-01 into the
TRIUMPH3-NR port indicated by the plug icon. The Battery LED (far left) will show the battery
charge status:
•
Green
– Fully charged.
•
Yellow
– Charging in progress.
•
Red
– Failed Charging
•
No Light
– Charger connector is not recognized.
2. Power On / Off
a. Power On:
•
Press and hold the PWR button for about 2 sec. (the LED will blink blue, indicating the
power button is active).
•
Release the PWR button. The PWR LED will flash yellow (device turning on). The SAT
and POS LEDs will flash red/yellow/green several times (system is loading).
•
Wait until the PWR, SAT and POS LEDs stop blinking. The rest of LEDs will work
according to their status.
Note: If the PWR LED flashes several times red and turns off, this means the battery is discharged.
b. Power Off:
•
Press and hold the PWR button for 2 sec. (the LED will flash yellow).
•
The device will turn off.
For a long internal battery pack life, use the JAVAD supplied power cables and adapter.
TRIUMPH-3NR
Quick Start Guide
Version 8
June 2023
