Javad Prego, Operator'S Manual

Page: 58 / 152

2-22 Prego Operator’s Manual www.javad.com
C O N F I G U R A T I O N
Radio Configuration
2
12.
Click Close and then Exit to quit the program (Figure 2-29).
Figure 2-29. Click Close then Exit
Notice: The Base station and internal Prego PDL radios must be configured with
the same Channels, Radio Link characteristics (except Digisquelch),
and Serial Interface parameters.
13.
Open PCView.
14.
Click File->Connect .
15.
On the Connection Parameters screen, select a baud rate of 38400 and
enable the Manual mode only check box (Figure 2-30), then click Connect .
Figure 2-30. Connection Parameters – Manual Mode Only
16.
On the Manual Mode screen, write the following commands, pressing Enter
(or clicking Send command ) after each command. When finished, you
should have six responses (Figure 2-31 on page 2-23).