Javad Maxor, User Manual

Page: 92 / 142

4-4 Maxor User’s Manual www.javad.com
4
O P E R A T I O N
Using MinPad
This operation may require from fractions of a second to several minutes,
depending on the circumstances and the amount of internal memory.
Table 4-1. FN Key Functions and REC LED Status
FN Key REC LED Status
When data recording is OFF, and the FN key is...
Not pressed
No light No data recording.
Orange blink Internal file system test in progress.
Red No free memory; hardware problem
with data recording.
Pressed for < 1
second
If FN key mode is «LED blink mode switch»
Orange Release to charge information mode.
If FN key mode is «Occupation mode switch»
Orange No function.
Pressed for 1–5
seconds
If FN key mode is «LED blink mode switch»
Green Release to start data recording (post-
processing occupation mode
undefined).
If FN key mode is «Occupation mode switch»
Green Release to start recording (Kinematic
or Static post-processing occupation
mode).
Pressed for 5–8
seconds Red Release to turn serial port A baud rate
to 9600 bps.
Pressed for > 8
seconds No light No function.