Javad Maxor, User Manual, Page: 83 / 142

www.javad.com Maxor User’s Manual 3-13
S E T U P A N D S U R V E Y
Surveying with the Maxor
7. Click the Set all parameters to defaults button located at the bottom of the
Receiver Configuration screen (Figure 3-9).
Figure 3-9. Set All Parameters to Defaults
8. On the Receiver Configuration screen, select the MinPad tab. Specify desired
settings. Refer to the PCView User's Manual for more information.
9. Select the Positioning tab and set the Position Masks, Elevation mask parameter to
15 (Figure 3-10).
Figure 3-10. Receiver Configuration – Positioning
10. Select the Base tab and set the following parameters (Figure 3-11 on page 3-14):
• GPS/GLO at one time - enable
• Antenna position - enter Lat, Lon, and Alt values. Do one of the following:
–If known, type in the values.
–Click Get from receiver .