Javad Maxor, User Manual

Page: 79 / 142

www.javad.com Maxor User’s Manual 3-9
S E T U P A N D S U R V E Y
Surveying with the Maxor
Figure 3-6. Advanced->Multipath
1.
Click the Loop Management tab and set the following parameters, then
click Apply (Figure 3-7):
•
Enable Common Tracking – enable
•
Static mode – enable (disable for Rover receivers)
Figure 3-7. Advanced->loop Management
2.
Set up each antenna and receiver as described in “Maxor Receiver Setup” on
page 3-2.
3.
Begin your survey.