Javad Maxor, User Manual

Page: 71 / 142

www.javad.com Maxor User’s Manual 3-1
S
ETUP AND
S
URVEY
3
This chapter describes the following:
Maxor Receiver Setup . . . . . . . . . . . . . . . . . . . page 3-2
Surveying with the Maxor . . . . . . . . . . . . . . . . page 3-7
Chapter Tip:
To set up your Maxor receiver, you must:
1.
Configure the receiver as described in “Configuration”.
2.
Set up your Base or Rover station. See “Step 1” on page 3-2.
3.
Measure the antenna height. See «“Step 2” on page 3-2 for
internal antennas, or see “External Antenna Setup” on
page 3-4 for external antennas.
4.
Begin collecting data. See “Step 3” on page 3-4.
All Maxor receivers include an internal, micro-strip antenna. This
antenna is able to capture L1/L2 signals from GPS and GLONASS
satellites. Also, your Maxor can be used with an optional external
antenna.