www.javad.com
Maxor Operator’s Manual
3-19
S E T U P A N D M E A S U R I N G
Measuring with the Maxor
epoch to which the newly received RTCM/CMR message
corresponds) or the current stand-alone position (while waiting for
new RTCM/CMR messages coming from the base).
• Select the antenna status during RTK, either Static or Kinematic.
• Specify the Ambiguity fixing level (not applicable to RTK Float).
The
Ambiguity Fixing Level
radio buttons govern the process of
the RTK engine, fixing integer ambiguities. The RTK engine uses
the ambiguity fix indicator when making decisions whether or not
to fix ambiguities. Low, Medium, and High correspond to the
indicator's 95%, 99.5% and 99.9% states, respectively. The higher
the specified confidence level, the longer the integer ambiguity
search time.
6. Select the
Ports
tab and set the following parameters for Serial C
•
Input
drop-down list – select desired differential correction format.
•
Period
(sec) – leave as is.
•
Baud rate
drop-down list – select a baud rate (i.e., the receiver port
baud rate at which differential messages will be received from
modem).
Figure 3-14. Rover Configuration – Ports
7. Click
Apply
.
8. Click
OK
to close the
Receiver Configuration
screen.
Summary of Contents for Maxor
