2-28
Maxor Operator’s Manual
www.javad.com
C O N F I G U R A T I O N
Radio Configuration
2
Set Radio Link Parameters for a Dedicated Channel
1. From the
Protocol
control of the
Radio Link
tab, select between
JNS and PDL (Figure 2-22):
Figure 2-22. Radio Link Tab
•
JNS
– Select this protocol if all of the radio-modems at your jobsite
are manufactured by Javad Navigation Systems.
•
PDL
– Select this protocol if you use PDL radio-modem(s) together
with JNS radio-modem(s) at the jobsite.
2. From the
Modulation Type
control (Figure 2-23 on page 2-28),
select a modulation scheme that will be used by your base radio-
modem. .
It can be either
4-Level-FSK
(Frequency Shift Keying) or
GMSK
(Gaussian Minimum Shift Keying).
Figure 2-23. Modulation Type
If the Link Rate is...
Use...
4800 baud
GMSK
9600 baud
GMSK or 4-Level-FSK
19200 baud
4-Level-FSK
Summary of Contents for Maxor
