Javad Maxor, Operator'S Manual

Page: 54 / 164

2-20 Maxor Operator’s Manual www.javad.com
C O N F I G U R A T I O N
MinPad Configuration
2
You use PCView to configure MinPad settings. Refer to the PCView Software
Manual for all possible MinPad configurations.
1.
Connect your receiver and computer. See “Connecting the Maxor and a
Computer” for this procedure.
2.
Start PCView.
3.
On the Connection Parameters dialog box, enable RTS/CTS handshaking
(Figure 2-19) and then click Connect .
Figure 2-19. Connection Parameters – RTS/CTS Handshaking
4.
Click Configuration->Receiver (Figure 2-20).
Figure 2-20. Configuration->Receiver
5.
Click the MinPad tab, set the following parameters and click Apply
(Figure 2-21). See the following pages for descriptions of these parameters.
• Recording interval on page 2-21
• Elevation mask for log file on page 2-21
• File name prefix on page 2-21
• Always append to the file on page 2-22
• Files Creation mode on page 2-22
• Automatic File Rotation Mode (AFRM) on page 2-22