34
LGG100-GG Operator’s Manual
www.javad.com
C O N F I G U R A T I O N
MinPad Configuration
2
3.
On the
Connection Parameters
dialog box, enable RTS/CTS handshaking
(Figure 2-9) and then click
Connect
.
Figure 2-9. Connection Parameters – RTS/CTS Handshaking
4.
Click
Configuration->Receiver
(Figure 2-10).
Figure 2-10. Configuration->Receiver
5.
Click the
MinPad
tab, set the following parameters and click
Apply
(Figure 2-11 on page 35). See the following pages for descriptions of these
parameters.
• Recording interval on page 35,
• Elevation mask for log file on page 35,
• File name prefix on page 35,
• Always append to the file on page 36,
• Files Creation mode on page 36,
• Automatic File Rotation Mode (AFRM) on page 36,
• FN key mode on page 37.