Javad JNSGyro-4T, Operator'S Manual

Page: 79 / 116

www.javad.com JNSGyro-4T Operator’s Manual 4-21
O P E R A T I O N
Loading New Firmware
4.
Activate FLoader (Figure 4-14).
Figure 4-14. Floader Main Screen
5.
On the Connection tab, select the COM port on your computer that connects
with your board and select its speed (usually 115200).
6.
Select the Device tab and set the Device Type as Receiver (Figure 4-15).
Figure 4-15. Set Device Type
7.
Click Get from Device for device information (Figure 4-15).