62
JNSGyro-2T Operator’s Manual
www.javad.com
O P E R A T I O N
Loading New Firmware
4
4.
Activate FLoader (Figure 4-14).
Figure 4-14. Floader Main Screen
5.
On the
Connection
tab, select the COM port on your computer that connects
with your board and select its speed (usually 115200).
6.
Select the
Device
tab and set the
Device Type
as
Receiver
Figure 4-15. Set Device Type
7.
Click
Get from Device
for device information (Figure 4-15).
