Javad HPT404BT JL, Operator'S Manual

Page: 36 / 56

Command Line Interface
Special Commands
36 www.javad.com
ROUTE = 1
3.2. MPORT
The MPORT is an object that is responsible for maintenance serial port interface configuration such as
data rate.
MPORT [ Parameter Name ] [ Parameters List ] [ /? ]
4. Special Commands
4.1. BOOT
The BOOT command is intended to reboot the unit using selected user settings.
4.2. HELP
The HELP command types the list of all available commands:
HELP - Display this usage
XMOD - Activate X-Modem Protocol
BOOT - Reboot the unit
LINK - Set RF Link Operation Mode
DPORT - Set Data Port Configuration
MPORT - Set Maintenance Port Configuration
ALARM - Alarm Indication and Alarm Control Configuration
SLEEP - Set Sleep Mode Configuration
STATE - Display Status and Statistics
SAVE - Save Current Configuration into Configuration File
INFO - Display Product ID along with Hardware/Software Versions
ATI - Display Product ID along with Hardware/Software Versions
MAP - Operates with Channel Map
Parameter Name Parameter List
RATE 0 – Auto.
1 – 1200 baud
2 – 2400 baud
3 – 4800 baud
4 – 9600 baud
5 – 14400 baud
6 – 19200 baud
7 – 38400 baud
8 – 57600 baud
9 – 115200 baud, a default setting