background image

Preface

Manual Conventions

WEEE Directive

8

 

                                                                                                              

     

www.javad.com

Manual Conventions

This manual uses the following conventions:

Screen Captures

This manual includes sample screen captures. Your actual screen can look slightly different from the
sample screen due to the modem you have connected, operating system used and settings you have
specified. This is normal and not a cause for concern.

Technical Assistance

If you have a problem and cannot find the information you need in the product documentation, contact
your local dealer. Alternatively, request technical support using the JAVAD GNSS World Wide Web site
at: www.javad.com.

Example

Description

File

Exit

Click the File menu and click Exit

Link Space

This format represents titles of dialog windows/boxes, names of menu options, identifies 
program interface objects, such as checkboxes, edit boxes, radio buttons, etc.

Temp

This format is used to enter various string information (e.g., file and directory names) as 
well as operator commands.

Summary of Contents for HPT104BT Series













































Reviews: