Command Line Interface
Special Commands
SAVE
24
www.javad.com
BOOT
– Reboot the unit
LINK
– RF Link Operation Mode
DPORT
– Data Port Configuration
MPORT
– Maintenance Port Configuration
ALARM
– Alarm Indication and Alarm Control Configuration
SLEEP
– Sleep Mode Configuration
CONNECT – Connect to Specified Unit
STATE
– Display Status and Statistics
SAVE
– Save Current Configuration into Configuration File
INFO
– Display Product ID along with Hardware/Software Versions
DATAMODE – Exit Maintenance Mode
[COMMAND] /? – Display Command Usage
4.4.4. SAVE
The SAVE command is intended to store the unit’s currently used configuration into the User
Configuration file. The configuration stored in the User Configuration file is activated by automatically
after unit’s reboot.
4.4.5. SLEEP
The SLEEP command determines the sleep mode parameters. The sleeping FH915 can be activated by
real-time CLK, DTR/RTS lines, and command received through TTL inputs. The user can select one,
two, or all three conditions.
SLEEP [Parameter Name] [Parameters List] [/?]
Parameter Name
Parameter List
CLK
0 – Do not activate by internal real-time clock
(1 – 255) – Activate by internal real-time clock after 100 to 25500 msec of sleeping
HW
0 – Do not activate through DTR/RTS lines
1 – Activate through DTR/RTS lines
TTL
0 – Do not activate by external sense lines
1 – Activate by external sense lines
GTS
0 – Disable Sleep mode (default)
(1 – 255) – Go to sleep mode if there is no activity in 10 to 2550 msec
